What choose what products customers, and customers are in the selection of our products - Polyurethane sweepers Why choose our products: The company produces polyurethane cleaner has the following characteristics: 1) Polyurethane sweeper uses a polyurethane polymer, combined good mechanical properties, extending the product life cycle; 2) Polyurethane sweeper has interchangeable and adjustable spare parts, easier installation, replacement and maintenance. 3) Polyurethane sweepers compact design, preparation and reasonable, product light, beautiful, easy to operate; the scope of application of polyurethane: 1) For Bandwidth: 500 ~ 2000 (mm) 2) adapt with speed: ≤3.5 (m / s) 3 ) Material humidity: ≤15% 4) Operating temperature: -40 C ~ 90 C polyurethane cleaner methods and detailed installation Introduction: 1) Polyurethane is a road sweeper scraper, should be installed at the head drum. 2) the scavenger system and support bracket for fastening assembly and can be installed at any angle in the blade (360 °) 3) depend on the structure of the corresponding conveyor belt, the mounting member and the fastener can be installed inside or outside chute as long as they do not block the whereabouts of the material can be. 4) from a fixed point and the set point for all measurements. When the measurement is completed on one side, the other side should be measured. 5) polyurethane cleaner recommended priority externally mounted installation, maintenance and regulation because it is more convenient. In the present case, on both sides of the chute need be opening to accommodate a mating support tube. Long support tube should be cut in order to prevent injury and to facilitate installation. Polyurethane cleaning mechanism Features: Polyurethane is a belt conveyor cleaning alloy cleaner upgrading existing products, its blade made of imported raw materials, polymer materials to improve resistance to abrasion, corrosion, breakage, hydrolysis, no damage to the tape, extend the life of the tape, the main use of this cleaner spring tension adjuster, or belt when worn scraper blade surface when beating automatically follow up, compensate and ensure the blade surface in close contact with the tape, in order to achieve a good scraping effect. Product type and structure of the H-type polyurethane cleaner mounted on the drum at the discharge head, remove adherent material on the conveyor belt, to complete a sweep. P-type polyurethane cleaner installed near the head drum smooth working surface area, which could be matched with the H-type N-type secondary dissection (reversible) polyurethane cleaner installed near the head of the drum at a smooth working surface, remove the reversible conveyor run adhesive materials. O type (empty forging) Polyurethane cleaning roller is mounted on the rear face in the vicinity of the non-Tips: Dear customers when you purchase must explain what you want cleaner, belt width is much, so as not to delay your production ! Ji Ning Ouke Mining Equipment Co., Ltd. welcome you! Our products are worthy of your trust! Come quickly! Company Website www.jnokgk. Sales Ya